BIGMONAT Rechargeable Picture Light for Painting with Remote, Upgraded Leds 180LM Accent Art Spot Light with Rotatable Lighting Head, Brightness Dimmable Display Lamp for Frame Portrait Artwork Trophy

3 Lighting Modes & USB Rechargeable】 – Operated with Lithium batteries (included) ,recharged by USB cable(included),6 hours charging to get 60 hours run time. 180 Lumens bright, 3 Lighting Modes for your choice (3000K warm white, 4300K natural white, 8000K cool white).

Lighting Direction Adjustable】 – The picture light’s arm and tube (13 inches) can be rotated 180°to adjust the lighting direction to your desired position.

Brightness Dimmable Art Lighting and 2 way switch】 – Press 50% or 100% keys on remote control, or press the “+” or “-” button to adjust the brightness level of the art light as you wish. Turn ON the light and select the brightness by pressing the button on the light or the remote control.

Optional Auto OFF Timer】 – Press the timer button on the remote to set the picture frame light to auto shut off in 15, 30, 60 or 120 minutes.

Easy Installation & Multipurpose】 – Installed with screws(included). perfect for lighting up your paintings, artworks, pictures, mirror, dart board, photos, etc.

603, 0769891772914, 769891772914

Specification * Material: ABS plastic and Aluminum * Power Source: 1PCS 4400mAh lithium batteries(included) * 12pcs super bright SMD LEDs. 2W, 180 Lumens with 3 lighting modes 3000K warm white, 4300K natural white and 8000K cool white, 30,000 hours lifespan of the light. * Each light tube can be turned 180° up and down, rotate each light head independently to desired any angle.Installation Steps: 1.First remove printed paper mounting template from back of unit. 2. Drill two pilot holes in the location where you want to mount the picture light. Place screws (included) in pre-drilled holes. Tighten slightly until secure, but do not tighten all the way. Slide EZ Mount Bracket keyhole slots over screw heads and into position. 3. Use the built-in bubble level to make sure the mounting bracket is level before securing it to the wall. 4. Once you confirm that the bracket is level, tighten the screws to secure it to the wall. Take care not to over tighten. 5. To hang the picture light on the mounting bracket, align the picture light with the mounting bracket and slide the unit down. Picture light will lock into position. 6. To remove the picture light from the mounting bracket: A) Hold the picture light by the base (not light head). B) Slide the unit up. C) Once the body releases from mounting bracket, pull the unit out.PACKING LIST – 1 x Picture Light – 1 x Remote Control – 2 x Screws -1xUSB charging cable – 1 x User Manual

Leave a Reply