High Torque Clock Movement Mechanism with 17.8 Inch Long Clock Hands (Black)

Clock movement: high torque clock movement with hook, drive long clock hands (10 mm to 450 mm)

Size from the center of the hole to the tip: the hour hand is approx. 331 mm/ 13 inches long; The minute hand is approx. 452 mm/ 17.8 inches in length

Total shaft length: 22 mm (0.87 inches), thread length: 9.7 mm (0.38 inches), suitable for 9 – 13 mm (0.35 – 0.50 inches) thickness clock panel

Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and very suitable for DIY quartz wall clock replacement movement parts, etc.

Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent

, ,

High torque clock movement mechanism with 17.8 inch long clock handsFeatures:Total shaft length is 22 mm and its thread length is 9.7 mm, applicable for 9 – 13 mm (0.35 – 0.50 inches) thickness clock panel.Application:You can use the clock movement to repair, replace or make a clock, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.Easy and simple design:The component parts are easy to assemble together and the pure color metal hands can be painted with any color to match your clock.Specifications:Material: plastic and aluminumCase size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.63 inches)Hand length: hour hand length is 331 mm/ 13 inch; minute hand length is 452mm/ 17.8 inchPower: 1.5V AA 1 x battery (not included)Package includes:1 x Quartz clock movement1 x Close nuts1 x Minute hand1 x Hour hand1 x Plastic washer1 x Brass washer1 x Brass nut1 x Metal hookWarm notice:There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent; Please check the goods within 24 hours after receiving them. If the the size of the clock movement is not suitable, please contact us in time.

Leave a Reply