Forrest STIF05 5-Inch Saw Blade Dampener and Stiffener with 5/8-Inch Arbor

Forrest Sawblade DAMPENER helps kill saw scream-whistle from a vibrating blade surface

Dampen out motor and belt vibrations from being transmitted up to the rim of the teeth

Greatly reduce cutting noise; Hold blade rigid and true for better cuts on your machine

Are hardened and precision ground flat within .001″ to keep your blade true

Can be removed instantly if need requires; Diameter: 5-Inch

STIF05, 0406186000184, 406186000184

From the ManufacturerForrest’s blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it’s blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer’s blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2″ thick. They have a 30° Alternate Top Bevel with a 5° Face Hook on 10″ diameters and smaller.

Leave a Reply